Zeroing my new Scope for 3-Gun

I picked up a Primary Arms 1-6X Scope with ACSS Reticle "Advanced Combined Sighting System". I found this reticle to be very easy to use so far. The grouping I achieved in this picture is outstanding in my opinion. However, I did miss the target completely for 1 of my 8 shots fired. But for my 16" rifle, I like it.

Zeroing my new 3-gun scope for the AR15 at 400 yards pic.twitter.com/m3VVTB8Bv1
— NicTaylor00 (@NicTaylor00) December 29, 2013

Here is a link to the reticle:




Shooting at 400 Yards with the 3-Gun AR15 with 16 Inch Barrel Sporting the Primary Arms 1-6 Scope with ACSS Reticle

Troll Hunting the Internet - Stamping out the Haters!

A long overdue video for the haters out there. Too many trolls, so little ammo. Please join me in the fight against these haters.

More Troll Bait!

2013 Double Tap Championships First Person Shooter Videos

The 2013 Double Tap Championships in Wichita Falls Texas was 13 stages of pure adrenaline. The 2013 match had the theme for Men In Black, MIB. So all of the stages had something to do with the movie series. This is one my most favorite matches to shoot where speed really pays off if you can turn it up. Its also one of the more difficult matches to film due to the barricades and stage variety. So in this series of videos below I have broken them down into the First Person Shooter view or FPS, (this is the view that I see as I shoot). If you watch the videos on Youtube, you will be allowed to click on the links near the end of the video and see the "behind the scenes" detail with stage breakdown and scoring. So be sure and watch the videos to the end.

See the entire selection of DoubleTap videos on YouTube http://www.youtube.com/nictaylor00 with clickable links.

Colt 1911 Series 70 and 80 Dissasembly Instructions

In this video I will show you how to disassemble the slide of a series 70 1911 pistol for cleaning and inspection.

Series 70 Slide

Series 80 Slide

Tj's 1911 Series '80 To Series '70 Conversion Shims - Frame Slot Filler Standard .057'''' TJ's 1911 Series '80 to Series '70 Conversion Shims (Frame Slot Filler) replace the gap used by the "Colt Series '80 Firing Pin Block Actuating Levers" when removed by gunsmiths for crisper trigger pulls. It is nessessary to fill this frame gap so the sear will not wander over and lock up the sear / trigger mechanism. Shim/slot filler fits in the frame cutout permitting Series 70 slides and components to be fitted to Series 80 frames. No alteration drop-in fit. Available in the standard .057" width as well as .030" .060" and .065". Mfg: Tjs Custom SPECS: Steel in the-white.

Colt / Walther / Umarex 1911 22LR Basepad / Bumper Extention

These basepads from Shockbottle R&D not only enhance the appearance of your Colt 1911 22LR pistol, but allow for more positive seating of the magazine in the gun. They are constructed of anodized aluminum and are much more durable than that factory plastic ones. Unlike the Shockbottle GSG / Sig 1911 bumpers, these add no extra capacity to the magazine.

Due to US restrictions I can only ship to US addresses. Sorry for the inconvenience.

Colt Standard Aluminum Basepad (no added capacity)

$18.95 Each

---

Colt / Walther / Umarex 1911 22LR
Magazine Modification.  Package includes:  Follower, Magazine Spring and black anodized aluminum basepad for added capacity.  Together they turn your factory magazine into a 17 round magazine. Please note with this modification the slide lock on last shot fire no longer functions.

$24.95

---

Colt / Walther / Umarex 1911 22LR
15 rd Magazine Modification

$12.99



Please note with the magazine modification above, the slide lock on last shot fired no longer functions.

---

Colt 1911 A1 Government, Gold Cup and Rail Gun 10 & 12 Round Magazines

Factory 10 Round Magazine

OUT OF STOCK

Factory 12 Round Magazine

$29.99




We do not ship magazines that accept over 10rds. to the following: California, Chicago, IL., Maryland, Hawaii, Massachusetts, New York State and Washington D.C.

GSG (German Sport Gunworks) & Sig Sauer 1911 22LR Slide Disassembly and Firing Pin Safety Removal

In these videos I go over the dis-assembly and reassembly of the slide of the Sig Sauer ATI / GSG 1911 22Lr pistol clone. Mainly a breakdown of the "bolt" and its components. Periodically you may need to clean the bolt assembly and this will help with the process. Additionally I will go over the firing pin safety or the "series 80" components and how to defeat them. Why defeat the firing pin safety? There is no real good reason other than to perhaps to "clean up" your trigger pull and lighten it. Sometimes these extra moving parts of the firing pin safety / Series 80, cause more friction with the additional moving parts. By eliminating them it can be possible to get a better trigger. But be warned, bypassing safety features such as this can void warranties and be dangerous.  You can get upgraded parts for your Sig Sauer 1911 or GSG 1911-22 at our site www.GSGparts.com

Tj's 1911 Series '80 To Series '70 Conversion Shims - Frame Slot Filler Standard .057'''' TJ's 1911 Series '80 to Series '70 Conversion Shims (Frame Slot Filler) replace the gap used by the "Colt Series '80 Firing Pin Block Actuating Levers" when removed by gunsmiths for crisper trigger pulls. It is nessessary to fill this frame gap so the sear will not wander over and lock up the sear / trigger mechanism. Shim/slot filler fits in the frame cutout permitting Series 70 slides and components to be fitted to Series 80 frames. No alteration drop-in fit. Available in the standard .057" width as well as .030" .060" and .065". Mfg: Tjs Custom SPECS: Steel in the-white.

Aerial Gunnery - Shooting from a Helicopter

Paradise Helicopters and AR15Target.com bring together Aerial Gunnery where shooters get to fly in an MD-500 Helicopter. For my experience I drove to Temple Texas and got to ride in the front of the Helicopter with the pilot for 15 minutes while another shooter sat in one of the rear seats and engaged steel targets while we flew. After 15 minutes had passed it was my turn to take the gunners seat. My son was lucky enough to take a spot in the front seat while I shot. A forth person occupied the other rear seat and served as a safety officer and kept a close eye on the shooter to keep everyone safe. Shooting from a moving vehicle is difficult. Shooting from a helicopter is very difficult. The difficulty is compounded with the anxiety of actually flying in a helicopter, dealing with wired communication, wind, rain, etc... It adds a level of stress that I have not ever encountered. BUT the fun factor is so worth it. Shooting in stressful situations shows your weaknesses for sure. As I always say, "get out of your comfort zone and do a shooting match sometime". You will find shortcomings you never knew you had.

Sitting in the "observer seat"

The gunner sits in the rear behind the pilot

Using a brass deflector is needed to keep flying brass to a minimum inside the aircraft

Rearward gun view while performing a mag change

Forward gun view while engaging targets

10 steel targets sit in an open field waiting for a low level pass

Soldiers of Fortune?  Nah, just a whole lot of fun!